2010 ADA Standards for Accessible Design

ADA CHAPTER 2: SCOPING REQUIREMENTS AMERICANS WITH DISABILITIES ACT: SCOPING 235.2 Boat Slips. Boat slips complying with 1003.3.1 shall be provided in accordance with Table 235.2. Where the number of boat slips is not identified, each 40 feet (12 m) of boat slip edge provided along the perimeter of the pier shall be counted as one boat slip for the purpose of this section. Table 235.2 Boat Slips Total Number of Boat Slips Minimum Number of Required Provided in Facility Accessible Boat Slips 1 to 25 1 26 to 50 2 51 to 100 3 101 to 150 4 151 to 300 5 301 to 400 6 401 to 500 7 501 to 600 8 601 to 700 9 701 to 800 10 801 to 900 11 901 to 1000 12 1001 and over 12, plus 1 for every 100, or fraction thereof, over 1000 Advisory 235.2 Boat Slips. The requirement for boat slips also applies to piers where boat slips are not demarcated. For example, a single pier 25 feet (7620 mm) long and 5 feet (1525 mm) wide (the minimum width specified by Section 1003.3) allows boats to moor on three sides. Because the number of boat slips is not demarcated, the total length of boat slip edge (55 feet, 17 m) must be used to determine the number of boat slips provided (two). This number is based on the specification in Section 235.2 that each 40 feet (12 m) of boat slip edge, or fraction thereof, counts as one boat slip. In this example, Table 235.2 would require one boat slip to be accessible. 235.2.1 Dispersion. Boat slips complying with 1003.3.1 shall be dispersed throughout the various types of boat slips provided. Where the minimum number of boat slips required to comply with 1003.3.1 has been met, no further dispersion shall be required. 9664- 2010 Standards: Titles II and III Department of Justice Titles II and III - 2010 Standards - 66