2010 ADA Standards for Accessible Design

TECHNICAL CHAPTER 4: ACCESSIBLE ROUTES EXCEPTIONS: 1. Edge protection shall not be required on ramps that are not required to have handrails and have sides complying with 406.3. 2. Edge protection shall not be required on the sides of ramp landings serving an adjoining ramp run or stairway. 3. Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area specified in 405.7. 405.9.1 Extended Floor or Ground Surface. The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond the inside face of a handrail complying with 505. Advisory 405.9.1 Extended Floor or Ground Surface. The extended surface prevents wheelchair casters and crutch tips from slipping off the ramp surface. Figure 405.9.1 Extended Floor or Ground Surface Edge Protection 405.9.2 Curb or Barrier. A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground surface. Figure 405.9.2 Curb or Barrier Edge Protection 405.10 Wet Conditions. Landings subject to wet conditions shall be designed to prevent the accumulation of water. 130 - 2010 Standards: Titles II and III Department of Jus1ti6c7e