United States · ADA · Accessibility standard
2010 ADA Standards for Accessible Design
The Department of Justice’s scoping and technical accessibility requirements for facilities covered by the ADA.
- Publisher
- U.S. Department of Justice
- Edition
- 2010 standards
- Search coverage
- 279 of 279 PDF pages · 2 OCR pages
AccessibilityAnthropometry & ergonomics
Open original PDF at page 189 Source wording and page order preserved. Drawings and table layouts remain available in the original PDF.
CHAPTER 6: PLUMBING ELEMENTS AND FACILITIES TECHNICAL
611 Washing Machines and Clothes Dryers
611.1 General. Washing machines and clothes dryers shall comply with 611.
611.2 Clear Floor Space. A clear floor or ground space complying with 305 positioned for parallel
approach shall be provided. The clear floor or ground space shall be centered on the appliance.
611.3 Operable Parts. Operable parts, including doors, lint screens, and detergent and bleach
compartments shall comply with 309.
611.4 Height. Top loading machines shall have the door to the laundry compartment located 36 inches
(915 mm) maximum above the finish floor. Front loading machines shall have the bottom of the opening
to the laundry compartment located 15 inches (380 mm) minimum and 36 inches (915 mm) maximum
above the finish floor.
Figure 611.4
Height of Laundry Compartment Opening
612 Saunas and Steam Rooms
612.1 General. Saunas and steam rooms shall comply with 612.
612.2 Bench. Where seating is provided in saunas and steam rooms, at least one bench shall comply
with 903. Doors shall not swing into the clear floor space required by 903.2.
EXCEPTION: A readily removable bench shall be permitted to obstruct the turning space required
by 612.3 and the clear floor or ground space required by 903.2.
612.3 Turning Space. A turning space complying with 304 shall be provided within saunas and steam
rooms.
D2e2p2artment of Justice 2010 Standards: Titles II and III - 185
Titles II and III - 2010 Standards - 156
Edition and local adoption determine which requirements apply. Use the publisher’s document for the complete clauses, diagrams and amendments.