United States · ADA · Accessibility standard
2010 ADA Standards for Accessible Design
The Department of Justice’s scoping and technical accessibility requirements for facilities covered by the ADA.
- Publisher
- U.S. Department of Justice
- Edition
- 2010 standards
- Search coverage
- 279 of 279 PDF pages · 2 OCR pages
AccessibilityAnthropometry & ergonomics
Open original PDF at page 54 Source wording and page order preserved. Drawings and table layouts remain available in the original PDF.
ADA CHAPTER 2: SCOPING REQUIREMENTS AMERICANS WITH DISABILITIES ACT: SCOPING
ADA CHAPTER 2: SCOPING REQUIREMENTS
201 Application
201.1 Scope. All areas of newly designed and newly constructed buildings and facilities and altered
portions of existing buildings and facilities shall comply with these requirements.
Advisory 201.1 Scope. These requirements are to be applied to all areas of a facility
unless exempted, or where scoping limits the number of multiple elements required to be
accessible. For example, not all medical care patient rooms are required to be accessible;
those that are not required to be accessible are not required to comply with these
requirements. However, common use and public use spaces such as recovery rooms,
examination rooms, and cafeterias are not exempt from these requirements and must be
accessible.
201.2 Application Based on Building or Facility Use. Where a site, building, facility, room, or space
contains more than one use, each portion shall comply with the applicable requirements for that use.
201.3 Temporary and Permanent Structures. These requirements shall apply to temporary and
permanent buildings and facilities.
Advisory 201.3 Temporary and Permanent Structures. Temporary buildings or facilities
covered by these requirements include, but are not limited to, reviewing stands, temporary
classrooms, bleacher areas, stages, platforms and daises, fixed furniture systems, wall
systems, and exhibit areas, temporary banking facilities, and temporary health screening
facilities. Structures and equipment directly associated with the actual processes of
construction are not required to be accessible as permitted in 203.2.
202 Existing Buildings and Facilities
202.1 General. Additions and alterations to existing buildings or facilities shall comply with 202.
202.2 Additions. Each addition to an existing building or facility shall comply with the requirements for
new construction. Each addition that affects or could affect the usability of or access to an area
containing a primary function shall comply with 202.4.
202.3 Alterations. Where existing elements or spaces are altered, each altered element or space shall
comply with the applicable requirements of Chapter 2.
EXCEPTIONS: 1. Unless required by 202.4, where elements or spaces are altered and the
circulation path to the altered element or space is not altered, an accessible route shall not be
required.
2. In alterations, where compliance with applicable requirements is technically infeasible, the
alteration shall comply with the requirements to the maximum extent feasible.
5108 - 2010 Standards: Titles II and III Department of Justice
Titles II and III - 2010 Standards - 20
Edition and local adoption determine which requirements apply. Use the publisher’s document for the complete clauses, diagrams and amendments.