United States · ADA · Guidance
Guidance on the 2010 ADA Standards for Accessible Design
The Department of Justice’s explanation of changes to the ADA design standards, with section-by-section analysis and responses to public comments.
- Publisher
- U.S. Department of Justice
- Edition
- September 2010 guidance
- Search coverage
- 168 of 170 PDF pages · 4 OCR pages
AccessibilityAnthropometry & ergonomics
Open original PDF at page 141 Source wording and page order preserved. Drawings and table layouts remain available in the original PDF.
Plan 5B: 13-Foot Wide Accessible Guest Room
This drawing shows an accessible 13-foot wide guest room with features that comply with the 2010 Standards.
Features include a transfer shower, comparable vanity, open clothes closet, and door connecting to adjacent
guest room. Furnishings include two beds.
13’-0”
8’-0”
DDeeppaarrttmmeenntt ooff JJuussttiiccee Department of Justice Guidance on the 2010 Standards: Titles II and III - 137
”0-’8
”6-’51
The following accessible features are provided in the
2’-10” bathroom:
door
• Comparable vanity counter top space (section
806);
• Transfer shower (section 603.2);
• Shower seat (section 610.3);
• Clearance in front of the shower extends beyond
the seat and is 36 inches wide min. (section
607.2);
• Lavatory with vanity counter top recessed to
permit shorter rear grab bar at water closet
(section 604.5.2);
• T-shaped turning space in room (section 603.2.1);
• Required clear floor spaces at fixtures and turning
space overlap (section 603.2.2);
• Water closet clearance is 60 inches at back wall
and 56 inches deep (section 604.3);
• Centerline of the water closet at 16-18 inches from
side wall (section 604.2); and
• No other fixtures or obstructions located within
required water closet clearance (section 604.3).
The following accessible features are provided in the
living area:
• T-shaped turning space (section 304.3.2);
• Accessible route (section 402);
• Clear floor space between beds (section 806.2.3);
• Maneuvering clearances at all doors (section
404.2);
• Accessible operable window (section 229); and
• Accessible controls for the heat and air
conditioning (section 309).
Edition and local adoption determine which requirements apply. Use the publisher’s document for the complete clauses, diagrams and amendments.