United States · ADA · Accessibility standard
2010 ADA Standards for Accessible Design
The Department of Justice’s scoping and technical accessibility requirements for facilities covered by the ADA.
- Publisher
- U.S. Department of Justice
- Edition
- 2010 standards
- Search coverage
- 279 of 279 PDF pages · 2 OCR pages
AccessibilityAnthropometry & ergonomics
Open original PDF at page 166 Source wording and page order preserved. Drawings and table layouts remain available in the original PDF.
TECHNICAL CHAPTER 6: PLUMBING ELEMENTS AND FACILITIES
Figure 604.3.1
Size of Clearance at Water Closets
604.3.2 Overlap. The required clearance around the water closet shall be permitted to overlap the
water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves,
accessible routes, clear floor space and clearances required at other fixtures, and the turning space.
No other fixtures or obstructions shall be located within the required water closet clearance.
EXCEPTION: In residential dwelling units, a lavatory complying with 606 shall be permitted on
the rear wall 18 inches (455 mm) minimum from the water closet centerline where the clearance
at the water closet is 66 inches (1675 mm) minimum measured perpendicular from the rear wall.
Advisory 604.3.2 Overlap. When the door to the toilet room is placed directly in front of the
water closet, the water closet cannot overlap the required maneuvering clearance for the
door inside the room.
Figure 604.3.2 (Exception)
Overlap of Water Closet Clearance in Residential Dwelling Units
162 - 2010 Standards: Titles II and III Department of Jus1ti9c9e
Titles II and III - 2010 Standards - 133
Edition and local adoption determine which requirements apply. Use the publisher’s document for the complete clauses, diagrams and amendments.