United States · ADA · Accessibility standard
2010 ADA Standards for Accessible Design
The Department of Justice’s scoping and technical accessibility requirements for facilities covered by the ADA.
- Publisher
- U.S. Department of Justice
- Edition
- 2010 standards
- Search coverage
- 279 of 279 PDF pages · 2 OCR pages
AccessibilityAnthropometry & ergonomics
Open original PDF at page 91 Source wording and page order preserved. Drawings and table layouts remain available in the original PDF.
AMERICANS WITH DISABILITIES ACT: SCOPING ADA CHAPTER 2: SCOPING REQUIREMENTS
2. Check writing surfaces provided at check-out aisles not required to comply with 904.3 shall not be
required to comply with 902.
Advisory 226.1 General. In facilities covered by the ADA, this requirement does not apply
to work surfaces used only by employees. However, the ADA and, where applicable,
Section 504 of the Rehabilitation Act of 1973, as amended, provide that employees are
entitled to “reasonable accommodations.” With respect to work surfaces, this means that
employers may need to procure or adjust work stations such as desks, laboratory and work
benches, fume hoods, reception counters, teller windows, study carrels, commercial kitchen
counters, and conference tables to accommodate the individual needs of employees with
disabilities on an “as needed” basis. Consider work surfaces that are flexible and permit
installation at variable heights and clearances.
226.2 Dispersion. Dining surfaces and work surfaces required to comply with 902 shall be dispersed
throughout the space or facility containing dining surfaces and work surfaces.
227 Sales and Service
227.1 General. Where provided, check-out aisles, sales counters, service counters, food service lines,
queues, and waiting lines shall comply with 227 and 904.
227.2 Check-Out Aisles. Where check-out aisles are provided, check-out aisles complying with 904.3
shall be provided in accordance with Table 227.2. Where check-out aisles serve different functions,
check-out aisles complying with 904.3 shall be provided in accordance with Table 227.2 for each
function. Where check-out aisles are dispersed throughout the building or facility, check-out aisles
complying with 904.3 shall be dispersed.
EXCEPTION: Where the selling space is under 5000 square feet (465 m2) no more than one check-
out aisle complying with 904.3 shall be required.
Table 227.2 Check-Out Aisles
Minimum Number of Check-Out Aisles of
Number of Check-Out Aisles of Each Function
Each Function Required to Comply with 904.3
1 to 4 1
5 to 8 2
9 to 15 3
16 and over 3, plus 20 percent of additional aisles
227.2.1 Altered Check-Out Aisles. Where check-out aisles are altered, at least one of each check-
out aisle serving each function shall comply with 904.3 until the number of check-out aisles complies
with 227.2.
Department of Justice 2010 Standards: Titles II and III -5857
Titles II and III - 2010 Standards - 57
Edition and local adoption determine which requirements apply. Use the publisher’s document for the complete clauses, diagrams and amendments.