United States · ADA · Accessibility standard
2010 ADA Standards for Accessible Design
The Department of Justice’s scoping and technical accessibility requirements for facilities covered by the ADA.
- Publisher
- U.S. Department of Justice
- Edition
- 2010 standards
- Search coverage
- 279 of 279 PDF pages · 2 OCR pages
AccessibilityAnthropometry & ergonomics
Open original PDF at page 180 Source wording and page order preserved. Drawings and table layouts remain available in the original PDF.
TECHNICAL CHAPTER 6: PLUMBING ELEMENTS AND FACILITIES
Figure 608.2.2
Standard Roll-In Type Shower Compartment Size and Clearance
608.2.3 Alternate Roll-In Type Shower Compartments. Alternate roll-in type shower
compartments shall be 36 inches (915 mm) wide and 60 inches (1525 mm) deep minimum clear
inside dimensions measured at center points of opposing sides. A 36 inch (915 mm) wide minimum
entry shall be provided at one end of the long side of the compartment.
Figure 608.2.3
Alternate Roll-In Type Shower Compartment Size and Clearance
176 - 2010 Standards: Titles II and III Department of Jus2ti1c3e
Titles II and III - 2010 Standards - 147
Edition and local adoption determine which requirements apply. Use the publisher’s document for the complete clauses, diagrams and amendments.